Plastic crusher is a machine specially used for plastic granulation. It mainly crushes waste plastic products and processes them into particles, and then processes them into plastic particles through a granulator for use by downstream manufacturers. Plastic crushers are widely used in injection molding, extrusion, blow molding, plastic product recycling, and regeneration manufacturing.
Common problems and solutions in the use of plastic crushers
1. The Output is Too Low
The reason for the low output of the plastic crusher may be that the blades are worn or the gap between the blades is too large, which affects the crushing efficiency.
Solution: Check the blades of the plastic crusher and replace them if necessary.
2. The Machine is Blocked
The plastic crusher is prone to blockage during use, which affects the normal operation of the machine. The reason for the blockage may be that the feed is too much, or the plastic waste contains impurities.
Solution: Stop the machine and clean the blockage. Adjust the feeding amount and remove impurities from the plastic waste.
3. The Machine is Vibrating
The plastic crusher may vibrate during use, which affects the service life of the machine and the safety of the operator. The reason for the vibration may be that the blades are unbalanced or the foundation is not stable.
Solution: Adjust the blades to balance them and check the foundation of the machine. If the foundation is not stable, strengthen it.
4. The Machine is Noisy
The plastic crusher is prone to noise during use, which affects the working environment and the health of the operator. The reason for the noise may be that the blades are worn or the machine is not installed correctly.
Solution: Replace the worn blades and adjust the installation of the machine to make it stable.
5. The Machine is Overheating
The plastic crusher may overheat during use, which affects the service life of the machine and the safety of the operator. The reason for overheating may be that the motor is overloaded or the lubrication is insufficient.
Solution: Check the motor and reduce the load if necessary, and add lubricating oil to the machine.
In summary, plastic crusher, as a machine and equipment for processing and recycling plastic waste, has an important role and significance. During use, it is necessary to pay attention to various issues and select corresponding machines and equipment according to different plastic types and specifications to make it play a greater role and value, so as to achieve environmental protection and recycling of plastic products.
