goldenmachinerysusan@gmail.com    +86-15838007835
Cont

Have any Questions?

+86-15838007835

Dec 19, 2025

How should we properly operate the oil press machine?

Automatic Oil Press Machine Working Process

 

1. Raw Material Selection: Select suitable oil-bearing raw materials (such as peanuts, rapeseed, sunflower seeds, etc.) according to processing requirements, ensuring the raw materials are free of impurities and mold.

Oil Press

2. Pre-startup Inspection and Preparation: ① Thoroughly check the connections of all machine components to ensure there are no loose or detached parts; ② Manually rotate the pulley to check for smooth operation and listen for any abnormal noises; ③ Add sufficient and appropriate mechanical oil to the gearbox to ensure adequate lubrication of the transmission system.

Oil Press

3. Pressing Gap Adjustment: Adjust the screw to ensure the conical surface of the pressing screw is tightly fitted to the conical surface of the oil outlet; rotate the adjustment screw clockwise by 2-3mm, then tighten the nut to fix the gap after calibration, ensuring stable pressing pressure.

Oil Press

4. Power On: Connect the power supply and press the main power switch of the screw oil press to put the equipment in standby mode.

 

5. Temperature Preset: Operate the temperature controller through the equipment's electrical control panel to set the appropriate temperature according to the characteristics of the selected oil-bearing material (conventional range 150-200 degrees Celsius); when the machine body temperature reaches the preset value, the green light on the equipment turns off and the red light turns on, indicating that the next step can be performed.

Oil Press

6. Start the Main Machine: Press the main machine start button and confirm that the screw shaft rotates normally in a counterclockwise direction.

 

7. Feeding and Pressing: Pour the pre-treated oil-bearing raw materials evenly into the oil press's feeding port. The raw materials are gradually pushed into the pressing chamber by the screw shaft, and the oil is extracted through the pressing action.

Oil Press

8. Oil Filtration and Collection: When the pressed oil flows into the oil filter barrel, turn on the filter switch of the oil filter barrel to filter out impurities; after filtration, open the discharge switch at the bottom of the oil filter barrel to release and collect the pure oil.

Oil Press

 

Send Inquiry