1. Belt adjustment: In the middle of the two pulleys, the standard value is 7-12mm when the belt is pressed by fingers. When it is greater than the standard value, adjust the idler to the specified tightness.
2. Chain adjustment: Press the chain with fingers in the middle of the two sprockets, and the compression amount is 4-9mm as the standard value. When the standard value is exceeded, adjust the idler to the specified tightness.
3. Spot inspection, refueling and replacement of the oil of the stepless transmission gearbox: Remove the oil inspection plug when it is strictly forbidden to smoke, and the oil has just flowed out to an appropriate amount.
If the vegetable washing machine is not used temporarily and needs to be put on hold for a period of time, be sure to follow the following methods:
1. All parts of the vegetable washing machine are attached to soil, sundries, etc., rinse with clean water, and dry with a dry cloth to keep the equipment clean;
2. All the sundries and vegetable leaves attached to the rotating parts, belts, chains, etc. should be removed.
3. All rotary parts and friction active parts are fully oiled to prevent rusting.
4. Each chain is fully oiled to prevent rust.
