Operation steps for cleaning the inside of the whole grain mill!
When customers usually use the grain mill, they do not know how to clean the interior. The inner cavity of the grain mill is a thick layer of fine powder, which is difficult to clean. Some manufacturers use a brush, but some Some manufacturers are equipped with steel brushes, but customers can't use them, what should I do?
After the whole grain mill is finished grinding and the power is turned off, wipe it with paper and towel. This method is not recommended, why? Because it is unsanitary to wipe with paper and towel, the whole grain mill will produce good bacteria on the grinding cavity, so use a dry brush or steel brush to gently wipe off the inner cavity wall of the whole grain mill, and then sweep it again. out, and then wipe it with a brush, so as to completely ensure the cleaning of the inner cavity wall of the whole grain mill.
The correct steps of the whole grain mill should be as follows:
1. Turn off the power first (this is especially important), open the lid, and clean along the inner cavity wall with a steel brush or a brush.
2. Pay attention when brushing with a brush, do not use too much force, just brush lightly.
3. After brushing with a brush, open the front cover for ventilation for 6-10 minutes.
The whole grain mill has been cleaned in this way, which can not only improve the work efficiency, but also increase the life of the machine. Just give it a little clean up after work every day and your grain mill will look new.
