The influence of the texture of the coal material pressed by the briquette briquetting machine on the ball formation. If you want to know the answer to this question, you must first understand our briquette briquette machine. Let me introduce it to you, so that you can better understand Our ball press equipment.
The working principle of the briquette machine is:
The briquette briquette machine is a machine mainly used to press briquette in all briquetting machine equipment. It can be transported to other places for use, or processed again as a raw material for making briquettes, or directly used for combustion to provide heat for people to use, no matter which way of use, in this step, mainly The coal briquetting machine presses the briquette into shape.
Previously, we talked about many effective methods for compressing pulverized coal in the aspect of briquette briquetting machine, so we basically have nothing to say in this aspect, but in the selection of briquette materials It is still a very selective direction, because if the material of briquette is selected correctly, it can not only effectively suppress the briquette, but also ensure the effect of pressing.
This is because some soft coals are very easy to form when pressed by a briquette machine, and as long as they are properly processed after forming, the shape can be maintained for a very long time. Because many soft bituminous coals and anthracite pulverized coals are not very difficult to form without binders. For example, the wet coal rods used in the production of some small synthetic ammonia phosphorus nitrogen fertilizers in my country are a typical case. A base that cannot be out of balance, and pay attention to the calibration level. There should be no sundries on the machine. The gear box needs to be lubricated more, and the best maintenance time of the ball press machine should not be delayed.
Therefore, the pressing of the briquette briquette machine mainly depends on the properties of the coal material. According to the basic coal texture of the material, it is determined whether the material is suitable for this kind of briquette briquette machine equipment, and the pressure control of the briquette forming is selected according to the properties of the material. , From time to time, check whether there are sundries in the machine that affect the forming of materials, and constantly pay attention to the forming state of the briquette briquetting machine when it is working, to ensure the smooth progress of the forming work, and to ensure that the forming state is the state you want.
