1. The startup is normal. In a production line, there must be all kinds of drying equipment, but the characteristics of each machine are different, so we must not have the slightest slack in the operating procedures when operating the dryer. During the operation, it is necessary to carry out the idling test first, and then carry out the production and processing after ensuring that there is no abnormality in the equipment. Because of the situation of screwing in the program, it is very easy to have problems.
2. No matter what type or type of dryer, it is equipped with the manufacturer's operating instructions. When we use the dryer, it is necessary for the workers to be able to skillfully operate the equipment, its parameters, and the material-specific requirements, and strictly control the feeding process. Particle size and purity to prevent the drying effect from being unsatisfactory and the harm to the equipment.
3. In the process of using equipment to process materials, it is necessary to calculate the humidity ratio of the input materials and the efficiency of the dryer to prevent excessive intake of wet materials, resulting in unstable output. There is also control of the feeding amount of materials to prevent large-scale feeding, which will cause excessive wear and tear on the equipment.
4. After the dryer completes the processing of a unit, first of all, we must send someone to do the cleaning of the equipment, check whether there is any abnormality in the part of the equipment in time, and ensure that the daily production of the dryer is normal, enhance the durability of the equipment, extend The service life of the drying equipment.
