One: Let’s talk about the very common, old-fashioned vertical crushing mixer.
This kind of pulverizing mixer pulverizer is used on the mixing tank. At present, almost all farmers who use this equipment have used it for more than ten. It is a particularly early batch of equipment.
The advantage is that the floor space is small, and both two-phase power and three-phase power can be used.
The disadvantage is also obvious, that is, the feeding is slow, because the feeding tube is too long and too high, which greatly affects the efficiency, so it is gradually eliminated by the market.
Two: Nowadays, farmers use a lot of vertical split smashing mixers, and there are also called integrated smashing mixers.
The advantage is that the screen mesh is replaced, and the maintenance is convenient. Simple operation and easy installation. Two-phase electricity and three-phase electricity can also be used, and the crushing speed is average.
The disadvantage is that the noise is slightly larger than that of the cast iron grinder.
Three: Vertical cast iron crushing mixer.
This one is the same as the above two except that the grinding head of the pulverizer is made of the steel plate and the other is cast iron.
The advantage is that the noise is low, so the noise in the vertical grinding mixer is particularly small.
The disadvantage is that once the grinding head (that is, the grinding shell) of the cast iron pulverizer is broken, it has no value for maintenance and needs to be replaced with a new one.
Four: The high-jet pulverizing mixer is currently the most efficient in small equipment.
The high-jet pulverizer is the most efficient among the small pulverizers at present.
Advantages: It is high efficiency and good material. The efficiency of crushing corn with a 2.5-hole screen can reach about one and a half tons in one hour. It occupies a small area and can be placed according to the site. Moreover, there is a hose connection between the pulverizer and the mixing tank. If you have old equipment, you only need to replace the pulverizer. You can also add a high-jet pulverizer to the old equipment to work together to increase the rate.
Disadvantages: The price is higher than the ordinary grinder.
