If the ball press equipment is used improperly, it will cause the deformation of the eccentric shaft. Eccentric shafts are more susceptible to damage than other components of the briquetting machine equipment. Today, our technicians and you will understand the main reasons for the bending and deformation of the eccentric shaft of the ball press equipment, so that it can be effectively avoided during the use and operation of the ball press equipment.
The main reasons for the bending deformation of the eccentric shaft of the ball press equipment:
1. If the heat of the eccentric shaft is not handled properly, the stress will be concentrated, which will cause cracking in the short term;
2. The bracket plate or the backing plate of the desulfurization gypsum briquetting machine equipment does not meet the specifications, or the non-broken material will play a self-breaking maintenance role when it enters the crushing cavity;
3. During the hoisting process of the main engine, it is easy to roll over, causing the eccentric shaft to be twisted due to excessive force on one side;
4. Due to the over-strength operation, it will also constitute twists and turns, such as the hardness of the crushed object exceeds the rules of the product instruction manual;
5. The main engine of the ball press equipment runs in excess for a long time; it is bent due to the aging of the equipment.
