When the fruit sorting machine is used improperly sometimes, it will cause noise. Therefore, we must carefully investigate the reasons and deal with it in time. The following editor summarizes some of the reasons for the noise of fruit sorting machines and their treatment on this issue. The methods are mainly divided into internal and external reasons for your reference.
Abnormal sound caused by the internal fault of the device.
1. When the equipment bearing is damaged, it will cause abnormal noise when the sorting machine is running.
Treatment method: It is very laborious to manually rotate the bearing or there is friction noise after the machine is stopped, indicating that the bearing is damaged. At this time, it is necessary to disassemble the equipment and replace the bearing in the damaged part.
2. Do a good job in the dynamic balance of the equipment, causing the equipment to resonate
Treatment method: The magnetic roller of the equipment needs to be re-balanced, and the installation position of the equipment track and the position platform of the driving magnetic roller need to be leveled.
3. The vibration of the active sprocket device causes the conveyor belt to be out of synchronization
Due to the problem of equipment structure design, many high imitation equipment manufacturers have two-body design for vibration feeding. The production process problems of fruit sorting machines are not concentric, which are usually caused by the backward assembly process and need to be solved by high-break dynamic balancing. The abnormal noise caused by equipment failure is usually caused by bearing damage, so the separator needs to be regularly oiled during the use process. The service life of the imported bearing is more than 3 years.
Abnormal sound of equipment caused by external cables
1. When a large piece of iron passes through the magnetic roller of the eddy current separator, there will be a harsh abnormal sound, and the abnormal sound will return to normal after a short time, indicating that the iron has been unloaded.
2. There will be abnormal noises when there is iron or metal at the transfer position between the belt and the drum. Usually, the duration of such abnormal noises will exceed 30 seconds. At this time, it is necessary to stop the machine for inspection, and clean the foreign objects and restart the machine after testing. .
3. Abnormal noise caused by a large amount of dust adsorbed on the surface of the track. This kind of abnormal noise is usually weak, but it will generate heat under the eddy current force after a long time, thereby accelerating the wear of the shell. When the conveyor belt is worn out, it will enter the conveying surface and damage it. equipment.
