The pulverized coal briquetting machine is mainly used for pressing powdery materials that are difficult to form. Mainly used for: coal powder molding; dry powder molding; desulfurization gypsum molding; coke powder molding; iron filings and various metal ore powder molding, etc.
The treatment method for the slight dislocation phenomenon in the pulverized coal briquetting machine
After the briquetting machine has been used for a long time, due to the wear of the machine itself, there may be a slight dislocation phenomenon. There are two common dislocation phenomena, namely circumferential dislocation and axial dislocation. How to deal with these situations, please refer to the following article to solve:
One: Circumferential Dislocation Adjustment of "dislocation" in the circumferential direction. There is an adjustment disc at the end of the driven gear. First, loosen the circumferential bolts, tighten the top wire with a manual wrench, and determine the direction and amount of the top screw according to the direction and amount of the misalignment. Determine the number of deductions on the plate, then tighten the circumferential bolts on the adjustment disc, and then insert the test plate to test the misalignment. Two: adjustment of axial "dislocation"
Loosen the end cover of the bearing seat of the roller that needs to be adjusted, and then add or subtract gaskets at both ends of the bearing end cover according to the amount of displacement, and then tighten the gland bolts. It should be noted that this kind of misalignment rarely occurs. The ball machine has been adjusted before leaving the factory.
In order to avoid the above situation as much as possible, you must choose high-quality equipment when purchasing a briquetting machine. In addition, you must pay attention to the maintenance work during the use of the briquetting machine, especially the pulverized coal with large processing capacity. Ball machine and desulfurized gypsum briquette machine.
