1. The material should not contain superhard metal impurities, which will cause serious damage to the tool once it enters.
2. A professional electrician is required to install and ensure that the mill runs in the specified direction, so as to ensure the grinding effect. The motor is burnt due to the lack of phase of the power supply, which belongs to the operator's problem, and the company is not responsible for the warranty.
3. Persons under the age of 18, the elderly over 65 years old, the mentally handicapped and the slow-moving persons, those who have not studied and trained, and have not carefully read the instruction manual are not allowed to operate the machine.
4. In the process of processing, if it suddenly stops due to power failure and other reasons, it must be cleared of residual materials in the crushing cavity before it can be restarted.
5. If the machine parts are found to be seriously worn or damaged, they should be repaired or replaced in time.
6. After the machine is started, it should be discharged and processed only when it is running normally. Pay attention to the amount of feed to prevent the motor from overloading and boring the machine.
7. After each use of the machine, the inside of the machine should be cleaned and ventilated to dry.
8. When the machine is not used for a long time, the external power supply should be cut off. The machine should not be placed, but should be placed flat, and no heavy objects should be placed on it.
9. The bone crusher is guaranteed for one year. Damage caused by improper use and normal wear and tear are not covered by the warranty. It needs to be returned to the sales unit or manufacturer for maintenance, and the transportation cost shall be borne by the buyer.
