If you want to press powder materials into pellets, you need not only ball press equipment, but also some auxiliary equipment to complete the whole pellet pressing work. In the process of briquetting, the texture of the material will affect the forming of the dry powder briquetting machine, and the method of feeding and the speed and amount of the feeding will also directly affect the forming of the pellets. Therefore, we must pay special attention to the production of dry powder briquetting. materials. To achieve the ideal and satisfactory molding quality, it is necessary to adjust multiple angles and multiple links in the work of the dry powder briquetting machine. Because if each link is not in place, it may become the source of some problems and failures. For example, if the material is too wet, it may cause a series of problems such as machine blockage, unfavorable demoulding, and insufficient ball strength. Earlier we introduced the texture of the material, and today we are going to introduce some precautions when it comes to boring delivery.
Matters needing attention when the dry powder briquetting machine equipment is placed in the material
1. The sequence of operations. To operate according to the specifications, the sequence of some links must be followed. When feeding materials, it is no longer possible to start the feeding operation without starting the briquetting machine, otherwise the load of the motor will be greatly increased. In many cases, the damage of the motor is caused by this direct feeding. After starting, we recommend idling for a few minutes and then feeding is the most appropriate.
2. Whether the feeding is uniform. Excessive feeding of materials or material outage are two situations to be avoided in the production of dry powder briquetting machine. If the material is put in too much, the load of the briquetting machine will increase, and it is also prone to blockage. The material cut off is to delay the production work and reduce the efficiency. Therefore, it is the best way to distribute the materials evenly according to the specific situation.
